Our Services

Ankin provides a wide range of specialist services in commercial construction materials testing, Construction Quality Control, Foundation Engineering, Geotechnical Engineering and Geophysical surveys.

Civil Material Testing

Ankin offers testing of Soils, Aggregates for concrete, Pavement and Railway Ballast, Water, fresh and hardened Concrete, Construction Quality Control and Structural Integrity analysis.

Labaratory tests

We offer the following materials testing;

  • Soil Classification, Strength and Chemical Content Tests for Engineering properties
  • Concrete Mix Design;
  • Concrete Tests – Fresh and hardened concrete
  • Aggregates for Concrete and Road Pavement
  • Railway Ballast
  • Water Quality Analysis Tests
  • Bituminous Binders (Consistency and Performance properties)

The above tests are carried out in accordance with applicable international standards such as;

  • American Association for State Highways and Transportation Officials (AASHTO)
  • British Standard Institution (BSi)
  • European Standard (EN)
  • American Society for Testing and Materials (ASTM);

Drilling for Geotechnical Site Investigations

Drilling works, profile logging. We drill, sample
and conduct SPTs at Bridges, Basements, foundations, Dams Embankments, and Stone Quaries. We monitor ground water in drilled boreholes to confirm nature of ground water that aid in determining the suitable foundation types and constructability
.

Test Pit Excavation

For shallow studies, we excavate test pits manually/mechanically, depending on site conditions, to clearly observe the stratigraphy of the subsoil layers and visually classify the soils. We commonly apply this technique on proposed shallow foundation and road subgrade.

Dynamic Probing Light Hammer (DPL)

We use the Standard DPL Equipment to evaluate the in-situ soil properties such as relative density. The parameters obtained are then used to estimate the bearing pressures for both shallow and intermediate foundations 

Plate Load Tests

We carry out plate load tests in shallow foundations to accurately determine bearing pressures at varying depths and estimate the rate of settlement.

Cone Penetration Tests (CPT)

We use the Standard DPL Equipment to evaluate the in-situ soil properties such as relative density using a 10-kg hammer. The parameters obtained are then used to estimate the bearing pressures for both shallow and intermediate foundations – not exceeding 10m.

Ground Water Monitoring

We offer ground water level monitoring by lowering pipes and recording water levels for up to 72 hours. Through this, we can analyse the nature of ground water

Find world Best Services & Materials with us!

The uniqueness and strength of Ankin lies in the combination of knowledge and experience of the key staff in utilizing modern approaches of managing both small and large-scale Civil Engineering projects